Samsung HW-H750-ZA - Manual (Page 31)

31
ENG
MULTIROOM LINK
+ Connecting the Soundbar to Your Network via the WPS
Method
WPS
Plug In
WPS button
Wireless Router
WPS/Wi-Fi
SETUP button
 Follow the 1 to 3 steps as shown on the previous page. (See page 30)
4. Select WPS from the network type, and then press Next.
5. Press the WPS button on your wireless router, and then press the WPS/Wi-Fi SETUP
button on the back of the Soundbar. Once the Soundbar is connected, WPS appears
on the display screen and the Soundbar produces a sound at the same time.
● Press and hold the Surr.Sound button on the remote for over 5 seconds to activate
WPS function.
● The Soundbar does not support Wi-Fi Direct or Wi-Fi Setup (tethering).
● Some Wi-Fi devices may search for and find the Soundbar, but not support the
connection.
● For activation of the WPS function on a relevant AP, refer to the AP’s manual.
● The WPS function may not be supported on some APs. In that case connect to
the Internet using a wired network or the Soundbar’s Wi-Fi Setup.
● The Soundbar goes into stand-by for 2 minutes when you press the WPS/Wi-Fi
SETUP button. While the Soundbar is in stand-by, press the WPS button of your
router.
● For the WPS stand-by duration and the specifications of your router, refer to the
router’s manual.
● After pairing is complete, the Soundbar naming screen appears. Edit the name or
enter a name of your own choosing.