Samsung SCH-I770HAAVZW - Manual (Page 161)

Bluetooth and Wi-Fi Services 158
Bluetooth Bonds
Bluetooth Bonds
A bond is a relationship that you create between your Saga™ and another Bluetooth
wireless technology enabled device to exchange information in a secure manner.
Creating a bond involves entering the same Passkey on the two devices sharing a
bond. Once a bond is created between devices, the devices do not have to be
discoverable to exchange information; however, each device must have its Bluetooth
radio on.
Bonds are created only once between devices. Once a bond is created, devices can
exchange information as soon the bond is recognized, eliminating the need to
discover one another or to enter security features like a common Passkey.
Creating Bluetooth Bonds
You can create a bond between your device and another device that has Bluetooth
wireless technology. Once you do this, Bluetooth doesn't need to be in discoverable
mode in order for you to beam information between the two devices; the Bluetooth
radio only needs to be turned on. For more information, refer to "Adding a Bluetooth
Device" on page 91.
1. Make sure that the two devices are within range of one another and that
Bluetooth discoverable mode is enabled on both devices.
2. From the Today screen, tap Start located in the upper left corner of
the screen.
3. Tap Settings . By default, the Personal tab is highlighted.
4. Tap the Connections tab.
5. Tap Bluetooth .
6. Prepare your external Bluetooth device for communication and detection.
7. Tap the Devices tab and select Add new device from the on screen list.
Your phone will then display a list of discovered Bluetooth devices which
have been detected within its communication range.
8. Tap/select the device you wish to pair with and tap the Next soft key.
9. Enter the numeric passcode and press the Next button. You are then
notified the pairing is in progress.
10. Use either your virtual QWERTY keyboard or keypad to enter a new Device
Name for the external Bluetooth device and tap the desired services
available to that same device.
11. Tap the Done button to complete the process.