Samsung SC-HMX10C-RCL - Manual (Page 96)

88_ English 中文 _ 88
连接USB数据线
通过 USB数据线连接您的高清数码摄像
机至电脑，复制影音文件和照片文件。
1. 设置“USB Connect”(USB连
接)到 “Mass Storage”(海量存储)
 第 70页
2. 通过USB数据线将高清数码摄像机连
接至电脑。
在插入或拔出 USB端子的时候
不要用力过猛。
请在插入
USB端子之前检查插
入的方向是否正确。
请使用厂家提供的
USB数
据线。
•
•
•
断开 USB 数据线
先拔掉 USB 线，再关闭高清数码摄像机。
在完成传输数据之后，您必须按照以下方法断开 USB数
据线：
1. 点击任务栏上“安全删除硬件”图标。
2. 选择“USB Mass Storage Device”或“USB Disk,”然后点击“停止”。
3. 点击“确定”
4. 断开高清数码摄像机与电脑的连接。
建议您使用交流电源适配器代替电池组为数码摄像机供电。
当
USB数据线连接，开启或关闭高清数码摄像机会导致电
脑故障。
如果在转移数据的过程中从高清数码摄像机或者电脑上断开
USB数据线，数据传输将会停止并且数据可能损坏。
如果您通过USB HUB将USB数据线与电脑相连或者同时连
接其他的 USB设备，数码摄像机可能不会正常工作。如果发
生这种情况，请您从电脑上拔下 USB设备，重新连接高清数
码摄像机。
•
•
•
•
HD camcorder PC
连接到电脑
CONNECTING THE USB CABLE
To copy the movie fi les and photo fi les to your
PC, connect your HD camcorder to the PC with
a USB cable.
1. Set the “USB Connect” to “Mass Storage.”
 page 70
2. Connect the HD camcorder to the PC with a
USB cable.
● Don’t apply excessive force when
inserting or extracting a USB cable
into/from a USB jack.
● Insert a USB after checking the
direction of its insertion is correct.
● Use the provided USB cable.
Disconnecting the USB cable
First disconnect the USB cable and turn off the HD camcorder.
After completing the data transmission, you must disconnect the
cable in the following way:
1. Click the “Unplug or eject hardware” icon on the task tray.
2. Select “USB Mass Storage Device” or “USB Disk,” and then
click “Stop.”
3. Click “OK.”
4. Disconnect the USB cable from the HD camcorder and PC.
● We recommend using the AC power adaptor as the power supply
instead of the battery pack.
● When the USB cable is connected, turning the camcorder on or off the
camcorder may cause the PC to malfunction.
● If you disconnect the USB cable from the PC or the HD camcorder
while transferring, the data transmission will stop and the data may be
damaged.
● If you connect the USB cable to a PC via a USB HUB or simultaneously
connect the USB cable along with other USB devices, the HD
camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the HD camcorder.
connecting to a PC