Samsung SC-HMX10C-RCL - Manual (Page 31)

23_ English 中文 _ 23
USING THE LCD SCREEN
Adjusting the LCD screen
1. Open up the LCD screen 90° with your fi nger.
2. Rotate it to the best angle to record or play.
WARNING
Do not lift the HD camcorder by holding
the LCD screen.
●
Over-rotation may cause damage to
the inside of the hinge that connects
the LCD screen to the HD camcorder.
●
See page 67 to adjust brightness and
contrast of the LCD screen.
Using the touch panel
You can play recorded images and set the
functions by using the touch panel.
Place your hand on the rear side of the LCD panel
to support it. Then, touch the items displayed on
the screen.
●
Be careful not to press the buttons
nearby the LCD panel accidentally
while using the touch panel.
●
The tabs and indicators that appear
on the LCD panel depend on the
recording/playback status of your HD
camcorder at the time.
●
The touch screen may malfunction
because of the LCD protection fi lm is
that is adhered to it when purchasing
the product. Remove and discard the
protection fi lm before using.
警告
使用 LCD 显示屏
调整 LCD显示屏
1. 呈 90°打开LCD显示屏。
2. 转动到最佳角度进行录制或者播放。
不要握着 LCD显示屏举起数码摄像机。
转动一周会导致内部连接 LCD显示屏
和高清数码摄像机之间的铰链损坏。
参见第
67页,调整LCD显示屏的亮度
和颜色。
•
•
使用触感控制板
您可以通过使用触感控制板进行播放录制的图
像,以及设置一些功能项。
用手在
LCD控制板的后面支撑,然后再用手指触
碰屏幕上显示的选项。
请注意当使用触感控制板的时候
不要偶然地触碰
LCD控制板区的
按钮。
在
LCD控制板上显示的导航键和指
示图标取决于当时您的高清数码摄
像机所处的录制/播放状态。
触摸屏可能会因
LCD保护膜（购买
产品时贴上去的）而功能异常。
请在使用之前撕下保护膜。
•
•
•
�
�
Language
Demo
A 가
5 / 5 Anynet+ (HDMI-CEC)