Asante Technologies Voyager II - Manual (Page 61)

Basic Setting > Network > UPnP (Universal Plug and Play)
If you connect your camera to a router, IP allocator, or wireless AP, your camera will possibly
be blocked by the NAT and can’t be located on the Internet. To penetrate the firewall, activate
the supportive item- UPnP. The Link URL shows the external IP address and the port of the
router. Enter the IP address in the Internet Explorer to penetrate the NAT.
„ Basic Setting > Network > UPnP > UPnP Device
Active: yes (enable)/no (disable)
Device Name: the name of the UPnP device
„ Basic Setting > Network > UPnP > UPnP Traversal
Active: yes (enable)/no (disable)
Port Range: the range of the usable ports, from 32768 to 65535 as default
Link URL: After the network camera penetrates the firewall successfully, the actual
external IP address and port will be shown.
Click “Save” to confirm when you finish.
UPnP setting
61