Asante Technologies Voyager II - Manual (Page 30)

System Settings
System setting contains basic and application settings. The basic setting is executed for basic
system information, transmission speed, audio/video code, user authorization, date/time, and
IP filter, while the application setting is executed for event triggering definition and other
relevant settings, definition of the motion detection area, firmware update, reset to factory
default, and reboot.
Basic Settings
Basic Setting > System (System info)
Basic Setting > System > System
Click Setting to enter
the setting page
„ Basic Setting > System > System > System Info
Device Name: You can set the name for your camera here. Click Set to complete the
setting.
Network information included MAC Address, IP Address, Network Mask, and Gateway.
Firmware, Firmware Building time and Firmware Building Number are belong to
Firmware version information.
Current Viewers: The number of viewers who are currently accessing the video stream.
LED Switch: Determine whether to enable or disable Status LED indicator or not.
30