Samsung SCX-5835FN-XAR - Manual (Page 68)

Scanning_ 6
For network connected machine
Make sure the printer driver is installed on your computer using the software
CD, since the printer driver includes the scan program. (See "Installing
network connected machine’s driver" on page 2. )
1.
Make sure that your machine and the computer are connected to a
network and Samsung Scan Manager is installed on the computer.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3. Press Scan from the main screen.
If the authentication message shows, enter Auth. ID, Password
and Realm Name. This message shows only when the network
administrator has set the authentication in SyncThru™ Web
Service.
4. Press Scan to PC.
5. Make sure Network PC is shown.
If neccessary, press the right arrow to toggle from Local PC to Network
PC
.
6. Select ID and enter Password, which you have set from the Samsung
Scan Manager.
7. Press Login.
8. Select one from the application list and press Select.
9. Select the scanning setting, such as the resolution or original size.
10. Press Start on the control panel to start scanning.
11. The original will be scanned and sent to your computer.
You can change the scanner properties of your machine and the scan
settings from the Samsung Scan Manager window. Click Properties
and set the options in each tab. (See "Using SyncThru™ Web
Service" on page 1.)
SCANNING ORIGINALS AND SENDING VIA
SMB/FTP (SCAN TO SERVER)
You can scan an image and send it to a server via the SMB or FTP.
Preparation for scanning to SMB/FTP
Select the folder and share it with the machine in order to receive the
scanned file.
The next steps are for SMB server setting using SyncThru™ Web
Service, and the setting for FTP server is the same as SMB. Apply the
same steps for setting up the FTP server.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Address Book.
5. Click Add.
6. Enter a name and speed number.
7. Check Add SMB.
8. Enter the server address in dotted decimal notation or a host name.
9. Enter the server port number, from 1 to 65535. The default port number
is 139.
10. If you want to allow the unauthorized person’s access to SMB server,
check Anonymous. By default, this is unchecked.
11. Enter the login name and password.
12. Enter the domain name of the SMB server.
13. Enter the path of shared folder in the SMB server for storing the scanned
images.
14. Configure Scan folder creating policy, Filing Policy and File Name.
15. Click Apply.
Scanning and sending to SMB/FTP server
1. Press Scan from the Main screen.
If the authentication message shows, enter User Name and
Password. This message shows only when the network
administrator has set the authentication in SyncThru™ Web
Service. (See "Managing your machine from the website" on
page 99.)
2. Press Scan to Server.
3. Place the originals face up in the DADF. Or you can place a single
original document face down on the scanner glass.
4. Adjust the document settings in the Image tab.
5. Select Duplex and Resolution in the Basic tab.
6. Press Scan to Server to show the SMB server list you entered in the
SyncThru™ Web Service.
7. Select the destination SMB server.
You can select up to five destinations using both of SMB or FTP
servers.Press Start on the control panel.
8. The machine begins scanning and then sends the scanned image to the
specified server.