Samsung SCH-R261BSAXAR - Manual (Page 27)

Call Functions 23
Name Dialing dials any number stored in your Contacts list by
saying the name of the contact. Digit Dialing dials any valid
telephone number, as well as numbers not stored to your
Contacts list by speaking the digits of the number.
Dialing by Name
To dial a name, do the following:
1. In standby mode, press and hold .
“Say a Command” displays on the screen and is
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 82.)
5. Press Repeat to say the name again.
– or –
Press Settings, then press Exit to exit Voice Dial without
dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
6. Say one of the following number types:
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Dialing by Number
To dial a number, do the following:
1. In standby mode, press and hold .
“Say a Command” displays on the screen and is
pronounced through the speaker.
2. Say “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call.