Samsung SEC-R470NBAUSC - Manual (Page 104)

101
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Reset Digits.
The phone prompts you to confirm digit reset.
2. To reset your digit adaptation, press the OK soft key. To
cancel, press the Back soft key.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. At the Voice SVC sub-menu, select Voice Settings ➔
Sound. The following options appear in the display:
• Prompts — Enables (On) or disables (Off) playing of prompts.
• Digits — Enables (On) or disables (Off) playing of digits.
• Names — Enables (On) or disables (Off) playing of names.
• Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
2. Select the desired option and setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
• Key Only — Press and hold to activate VoiceSignal for one
call.
• Key/Ear Mic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset.
• Key/Flip — Press the key to activate VoiceSignal for repeated
calls. Open and close the flip to make and end calls using
VoiceSignal. Press
to release VoiceSignal.
2. Select the Voice Launch option you want.
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
1. At the Voice SVC sub-menu, select Voice Settings ➔
About.
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.