Samsung SC-MX20E-QVC - Manual (Page 48)

English _38
INSERTING / EjECTING THE MEMORY CARD
Inserting a memory card
1. Turn the memory camcorder off.
2. Slide the memory card slot cover to the right to open the cover.
3. Insert the memory card into the memory card slot in the direction of the
arrow shown in the figure until it softly clicks.
4. Close the cover.
Ejecting a memory card
1. Turn the memory camcorder off.
2. Slide the memory card slot cover to the right to open the cover.
3. Slightly push the memory card inwards to pop it out.
4. Pull the memory card out of the memory card slot and close the cover.
Never format the built-in memory or memory card using a PC.
If you insert a memory card when the memory camcorder is on, a pop-up message will prompt you
automatically to select the storage type.
If there is no memory card inserted, only the built-in memory will be available.
Do not eject a memory card while it is being used in the camcorder. The memory card and its data may be
damaged.
Do not remove the power (battery pack or AC power adaptor) when accessing storage media such as
recording, playback, format, delete, etc. The storage media and its data may be damaged.
•
•
•
•
•
CARD
CARD
CARD
CAUTION
As shown in the figure, slide the memory card inwards with the label facing down.
If the memory card is inserted with the label facing up, the memory camcorder may not work, or the tip of
the memory card can be damaged.