Samsung SC-MX20E-QVC - Manual (Page 104)

English _94
VIEWING ON TV SCREEN
1. Turn on the TV and set the input selector to the Input
connection the memory camcorder is connected to.
This is often referred to as "line". Refer to the TV
instruction manual for how to switch the TV input.
2. Turn the memory camcorder on.
Slide the POWER switch downward and press the
MODE button to set Play ( ). ➥ page 22
The image that the memory camcorder is viewing will
appear on the TV screen.
You can also monitor the image on the LCD screen
of the memory camcorder.
3. Perform playback.
You can perform playback, recording or setting the
menu while viewing on TV screen.
Information that the memory camcorder is recording will appear on the TV screen: You can also display only part of
information or switch off the display. Refer to "TURNING THE SCREEN INDICATORS ON/OFF ( )" on page 27,
and press the button to switch the display status.
When "TV Display" is set to "Off ", OSD (On-Screen-Display) does not appear on the TV screen. ➥page 82
Howling may occur when the memory camcorder is too close to the other devices or the volume is high.
Keep the memory camcorder a reasonable distance away from the other connected devices.
When the AV cable is connected to the memory camcorder, the built-in speaker will automatically turn off and you
can not adjust the volume bar.
•
•
•
•
•
•
•
•
•
Refer to page 61 for "16:9 Wide" setting.
Image display depending on LCD and TV screen ratio
Record LCD
TV
16:9 4:3
16:9
4:3
Icon Subject