Samsung SMX-F40RN-XAA - Manual (Page 48)

6
basic recording
TAKING PHOTOS
PRECHECK!
• Open the LCD screen and press the Power ( ) button on the camcorder.
• Set the appropriate storage media. page 30 (SMX-F43/F44 only) (If you want to record on a memory
card, insert a memory card.)
• Select the Record ( / ) mode by pressing the MODE button. page 24
1. Select a subject to record.
• Adjust the LCD panel to the best angle for capturing.
• Use the Zoom lever or Zoom button to adjust the size of the
subject. page 39
2. Adjust the subject at the center of the LCD screen.
3. Fully press the PHOTO button.
• The shutter sound is heard. (when “Shutter Sound: On” is set).
• To continue capturing, wait until the current photo is completely
saved on the storage media.
• Recordable number of photos varies depending on the photo size and quality. page 34
• Audio is not recorded when taking photos.
• If focusing is diffi cult, use the manual focus function. page 58
• Do not turn off the camcorder or remove the memory card when taking photos as it may damage
the storage media or data.
• For the on-screen display information, see pages 12~13.
• Adjust brightness and contrast of the LCD screen using menu items. Doing so does not affect the
recorded image. page 86
• Photo fi les conform to the DCF (Design rule for Camera File system) standard, established by JEITA
(Japan Electronics and Information Technology Industries Association.)
• Available photo resolutions are 1696X960 and 848X480 in 16:9 aspect ratio, while 1600X1200 and
800X600 are available in 4:3 aspect ratio. (To switch to 4:3, release 16:9 mode.) page 49
• This camcorder provides one combined video and photo record mode. You can easily record
videos or photos in the same mode without having to change it.
• You can switch the play mode to the record mode by pressing the PHOTO or MODE button.
• Using the Quick View function, you can view the most recently recorded video or photo image right
after your recording. page 37
W
PHOT
O You can take photos and store them on the storage media. Set the
desired resolution before recording.  page 48