Samsung SMX-F40RN-XAA - Manual (Page 123)

111
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not
adjust automatically.
Set “Focus” to “Auto.” page 57
The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 58
The lens is dusty on the surface. Clear the lens and check the focus.
Recording is being made in a dark place. Increase the brightness in the
place.
•
•
•
•
The image appears
too bright or flickering,
or changes in color.
This occurs when recording images under a fluorescent lamp, sodium
lamp, or mercury lamp. Cancel “iSCENE” to minimise these phenomena.
page 46
•
Playback on other devices (TV, etc.)
Symptom Explanation/Solution
You cannot view
the image or hear
the sound on the
connected device.
Connect the audio line of the Audio/Video cable jack to your camcorder
and the connected device (TV, DVD recorder, etc). (Red color- right, White
color- left)
The Audio/Video cable jack is not connected properly. Make sure that the
Audio/Video cable jack is connected to the proper jack. page 93
•
•
Playback on your camcorder
Symptom Explanation/Solution
Pressing the
playback (Play/
Pause) button did
not start playing.
Press the MODE button to set Video Play mode.
Image files recorded on another camcorder may not play on your
camcorder.
Check out a memory card compatibility. page 32
•
•
•
The Skip or Search
function does not
work properly.
If the temperature inside the camcorder is too high, it cannot function
properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
•
Playback is
interrupted
unexpectedly.
Check if the AC adaptor or battery pack is properly connected and stable. •
You cannot hear
sound when playing
a Time Lapse
recording.
The Time Lapse REC function does not support sound. page 64 •
Photos stored on a
storage media are
not displayed in the
actual size.
Photos recorded on other devices may not appear at actual size.
This is not an error.
•