Samsung SMX-F40RN-XAA - Manual (Page 119)

107
Symptom Explanation/Solution
The power
automatically turns
off.
Is “Auto Power Off” set to “5 Min” ?
If no button is pressed for about 5 minutes, the camcorder is
automatically turned off (“Auto Power Off”). To disable this option,
change the setting of “Auto Power Off” to “Off.”  page 89
The battery pack is almost discharged. Charge the battery pack or
replace it with a charged one.
Use the AC power adaptor.
•
•
•
Power cannot be
turned off .
Remove the battery pack or unplug the AC power adaptor, and
reconnect the power supply to the camcorder before turning it on.
•
The battery
pack is quickly
discharged.
The temperature is too low.
The battery pack is not fully charged. Recharge the battery pack.
The battery pack reached the end of its lifespan and cannot be
recharged. Use another battery pack.
•
•
•
Displays
Symptom Explanation/Solution
The TV screen or
LCD display has
distorted images
or has stripes at
the top/ bottom or
on the left/right.
It can occur when recording or viewing a 16:9-ratio image on
a 4:3-ratio TV, or vice versa. For more details, see the display
specification.
•
Unknown image
appears on the
LCD screen.
The camcorder is in Demo mode. If you do not want to see Demo
images, change the setting of “Demo” to “Off.” page 92
•
Unknown indicator
appears on the
screen.
A warning indicator or message appears on the screen.
pages 104~106
•
The after image
remains on the
LCD screen.
This occurs if you disconnect the AC power adaptor or remove the
battery pack before turning the power off.
•
The image on the
LCD screen looks
dark.
Ambient light is too bright. Adjust the brightness and angle of the LCD.
Use the LCD Enhancer function.
•
•