Samsung SGH-T589HBBTMB - Manual (Page 174)

169
3. Press to erase the current device name and enter a
new name for this device using the keyboard.
4. Tap OK to confirm your setting.
Activating Visibility
ᮣ Press ➔ and then tap (Settings) ➔
Wireless and networks ➔ Bluetooth settings ➔ Visible.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. Press ➔ and then tap (Settings) ➔
Wireless and networks ➔ Bluetooth settings ➔
Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
2. Tap a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
tap OK.
Tethering
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note: You can not mount your phone’s microSD card to your computer
while using the USB tethering feature. If additional software or USB
drivers are required, navigate to:
http://www.samsung.com/us/support/
downloads .
1. Press ➔ and then tap (Settings) ➔
Wireless and networks ➔ Tethering and portable hotspot.
2. Plug in the USB cable between your computer and your
phone.
3. When prompted for a USB mode, press to exit the
menu.