Samsung SC-DC575-XAA - Manual (Page 93)

ENGLISH
93
Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only)
Setting the File Number (File No.)
 File Number setting works only in M.Cam Mode. page 26
 File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
 File numbers may be set as follows:
- Series: When there are existing files, the new image will be named as the next number in the sequence.
- Reset: When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [ (Camera)].
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select , then press the [Joystick].
5. Move the [Joystick] up or down to select , then press the [Joystick].
6. Move the [Joystick] up or down to select the desired option (Series or Reset), then
press the [Joystick].
 The selected option is applied.
7. To exit, press the [MENU] button.
Note
When you set to , each file is assigned with a different number so as to
avoid duplicating file names.
It is convenient when you want to manage your files on a PC.
4
Move OK Select MENU Exit
M.Cam Mode
►Memory
Photo Quality
File No.
►Super Fine
►Series
6
Move OK Select MENU Exit
Series
Reset
M.Cam Mode
►Memory
Photo Quality
File No.
AD68-01230A_US_R2.indb 93 2007-07-09 ¿АИД 1:04:01