Samsung SC-DC575-XAA - Manual (Page 42)

ENGLISH
42
DVD Camcorder: Before Recording
When using a New Disc: Formatting a new Disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD-R/+R DL disc: Formatting will automatically begin.
For a DVD-RW disc: You are prompted with the message.
Differences between
Video and VR mode
Video (Video Mode) : If the disc has been fi nalized, you will be able to
play the disc on most DVD Players/Recorders/Drives.
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but
playback is only possible on a DVD Recorder that supports VR mode.
Move the [Joystick] left or right to select or , then press [Joystick].
 Please refer to page 123 for disc type descriptions and usage.
 Upon completion, the message will appear.
 If you select , the warning message will appear.
Formatting a new disc is required to record on it. To format later, use the menu. page 79
For a DVD+RW disc: You are prompted with the message.
Move the [Joystick] left or right to select , then press [Joystick].
 Upon completion the message will appear.
 If you select , the warning message will appear.
Formatting a new disc is required to record on it. To format later, use the menu. page 79
Removing a Disc
1. Push the [OPEN] switch in the direction of the arrow.
 The disc cover will partially open.
2. Gently open the cover the rest of the way by hand.
3. Remove the disc.
 While pushing down the center portion of the disc spindle, pick up the disc by the edges to remove.
4. Gently push the section marked [PUSH CLOSE] on the disc cover to close it.
Note
The Finalize/Format functions are not available when the battery level is between and .
 Refer to page 11 for Finalized disc compatibility.
SP
Disc is not formatted.
Format?
Video VR Cancel
AD68-01230A_US_R2.indb 42 2007-07-09 ¿АИД 1:02:13