Samsung SC-DC575-XAA - Manual (Page 25)

25
ENGLISH
Preparation
Connecting a Power Source
 There are two types of power source that can be connected to your DVD Camcorder.
- The AC Power adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the DVD Camcorder without having to worry about the battery power. You can
keep the Battery Pack attached; the battery power will not be consumed.
1. Connect the AC Power adapter (AA-E9 TYPE) to a wall
socket.
The plug and wall socket type may differ according to
your resident country.
2. Open the DC IN Jack Cover.
3. Connect the DC cable to the DC IN jack of the DVD
Camcorder.
4. Set the DVD Camcorder to each mode by holding down
the Green Tab on the [Power] switch and turning the
[Power] switch to [ON] or [OFF].
Power Switch
AD68-01230A_US_R2.indb 25 2007-07-09 ¿АИД 1:01:29