Samsung SC-DC575-XAA - Manual (Page 57)

ENGLISH
57
DVD Camcorder: Advanced Recording
Setting the Custom White Balance
 You can adjust the white balance as you wish based on the recording environment.
1. Set the [Mode] switch to [DISC] or [CARD]. (SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [ (Camera)].
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select , then press the [Joystick].
5. Move the [Joystick] up or down to select , then press the [Joystick].
6. Move the [Joystick] up or down to select , then press the [Joystick].
 The will blink.
7. Place the subject under the desired lighting, then press the [Joystick].
 The will disappear and the white balance setting will
commence.
8. To exit, press the [MENU] button.
 Custom WB icon ( ) is displayed.
Notes
 You can directly access the White Balance function by using the [Q.MENU] button.
 page 27
 The White Balance function will not operate in EASY.Q mode.
 Turn the Digital Zoom off (if necessary) to set a more accurate white balance.
 Reset the white balance if lighting conditions change.
 During normal outdoor recording, setting to Auto may provide better results.
OK Select MENU Exit
Set White Balance
6
Move OK Select MENU Exit
Camera Mode
►Camera
Program AE
White Balance
Digital Effect
Shutter
Exposure
16:9 Wide
▼
Auto
Indoor
Outdoor
Custom WB
A
8
STBY
30 min
SP -RW
VR
0:00:00
16:9 Wide
AD68-01230A_US_R2.indb 57 2007-07-09 ¿АИД 1:02:50