Avaya 3100 - Manual (Page 45)

Advanced functions
Avaya 3100 Mobile Communicator - Client for Windows Mobile User Guide 45
Advanced functions
This section contains the following topics:
• “Placing calls” on page 45
• “Calling individuals” on page 46
• “Receiving calls” on page 51
• “Using the Mid-Call features” on page 52
• “Managing buddies” on page 54
• “Configuring your Presence Status” on page 59
• “Searching for people” on page 61
• “Working with Groups” on page 63
• “Instant Conferences” on page 65
• “Managing instant messages” on page 69
• “Tracking IM sessionHistory (Call Logs)” on page 72
• “Managing voice mail” on page 75
Note: Some devices have a physical keypad, and do not use the touch screen for numeric entry. This
document describes the touch screen approach; for devices with a physical keypad, use the keypad
for numeric entry instead.
Placing calls
Your Avaya 3100 Mobile Communicator Gateway telephone system manages all calls that you place on
Avaya 3100 MC - Client for Windows Mobile. Quickly and easily call your coworkers either by selecting
them from a Buddy list or by dialing their extension number.
Your office extension is associated with all of your outbound calls, regardless of your location. At any time,
use Avaya 3100 MC - Client for Windows Mobile to initiate calls from your desktop telephone, mobile
device, or home telephone; the people you call always see the same number.
Call modes
Two call modes are available:
• “Direct Outbound mode” on page 45
• “Call-me-First mode” on page 46
To use both call modes, you must configure an Outgoing Call Service DN in your Avaya 3100 MC - Client
system settings. However, if you do not configure a service number, you can only use the Call-me-First
mode. For more information, see
“Owner Information settings” on page 33 .
Direct Outbound mode
In Direct Outbound mode, initiate calls directly from your mobile device to other parties through the
enterprise telephony system. For more information, see
Figure 7 "Direct outbound mode." on page 46 .