Campbell Scientific RF300-Series DRL VHF/UHF Radio Transceivers - Manual (Page 53)

H-1
APPENDIX H. RF300 RADIO SPECIFICATIONS
TABLE H-1. RF300 Radio Specifications - UHF
GENERAL
Frequency Range 403 - 512 MHz
Frequency Control Synthesized
Channel Spacing 12.5/25 kHz
Mode of Operation Simplex of Half Duplex
Operation Voltage +13.3V DC nominal (10 -16V DC operational)
Regulated Supply Voltages +5.5V DC, +9.6V DC
Transmit Enable 3-16V DC at 100
µ
A Max
Receive Enable 3-16 DC
±
5% at 150
µ
A nominal (150
µ
A During receive)
Transceiver Enable 3-16V DC at less than 150
µ
A
Power and Data Connector 15-pin in-line Socket (Dupont 76308-14)
RF Input/Output Connector SMA Jack (female)
Operating Temperature -30
°
C to +60
°
C
Storage Temperature -40
°
C to + 85
°
C
Humidity 95% maximum RH at 40
°
C, non-condensing
Maximum Dimensions 4.585” L, 3.25” W, 2.212” H
FCC Compliance
DM3412
Customer must apply
DL3412 Part 90, Part 15(403-512 MHz), Industry Canada RSS119, Issue 5
RECEIVER
Bandwidth
16 MHz all bands except (20 MHz 308-405/450-470 MHz)
Frequency Stability ±
1.5 PPM (-30
°
C to +60
°
C)
Sensitivity - 12 dB SINAD ≤
0.35
µ
V
RF Input Impedance 50 ohms
Selectivity -70 dB/-60 dB (tN/t/E) for 25 kHz, 60 dB/50db (tN/t/E) for 12.5 kHz
Spurious and Image Rejection -70 dB
Conducted Spurious Emissions <-57dBm
Intermodulation -70 dB
FM Hum and Noise -40 dB 12.5/25 kHz
Receive Attack Time < 5 ms
Total Receive On Time 7 mS Maximum
Audio
Distortion
<3%
Buffered Output Level 150 mV RMS nominal at 2.5V DC bias
Discriminator Output
±
1 dB from DC to 5 kHz (reference to 1 kHz)
Output Bias 2.5V DC
±
10%
Output impedance >10k Ohms
RSSI 0.9V to 2.4V DC output from -120 to -60 dBm, attack time < 2 ms