beautypg.com

Campbell Scientific RF300-Series DRL VHF/UHF Radio Transceivers User Manual

Page 14

background image

SECTION 2. ASSEMBLING THE RADIOTELEMETRY NETWORK

2-4

This window shows the RF modem (RF1) attached to RS232 communication port 2. Next use the Add
Device button again to connect the datalogger to RF1.

This window shows the CR10X datalogger connected to the RF modem. Notice the Dialed Using RF95
path has been set to 10F. The RF95A path is unique to the RF95A dip switch settings.