Connected, Disconnecting, Datalogger setup – Campbell Scientific LoggerLink Mobile App for Android User Manual
Page 8

Connected
After you have connected with your datalogger, a set of tabs will
appear at the top of the screen. Tapping on these tabs will allow
you to perform different operations on your datalogger such as
viewing data in a tabular or graphical format, monitoring status,
and collecting data.
If you leave LoggerLink or your device goes to sleep while
connected to a datalogger, you will be automatically
disconnected from the datalogger 10 minutes after any
background processes (such as data collection) complete. Note
that if you have Prevent Sleep enabled (see the
section) your device will not automatically go to sleep
while you are connected to a datalogger. You must put the
device to sleep manually or disconnect from the datalogger.
Disconnecting
When you are finished interacting with your datalogger, tap your
device’s Menu button and select Disconnect (or simply tap your
device’s back button) to disconnect and return to the list of
dataloggers.
6