Campbell Scientific LoggerLink Mobile App for Android - Manual (Page 29)

changes to the table structure of the new program. The Run
On Power-up will set this program file to run when the
datalogger loses power and then powers back up.
Settings
The Settings page is used to view and/or change the internal
settings of the datalogger. If needed, each setting has detailed
help available by tapping the “i” button next to the setting.
Writable values will have an arrow next to the value that can be
tapped to change the value. Once changes have been made to
any setting(s), they must be applied to the datalogger by tapping
the Apply button in the upper right corner. Applying changes
stores them to the datalogger. Any setting that has been changed
but not applied will have an asterisk next to the setting name.
When you leave the Settings tab, any changes that have not been
applied will be lost.
The following options are available by tapping your device’s
Menu button while in the Settings window.
Refresh
When the Refresh option is selected, the datalogger settings
will be retrieved and any pending setting changes will be
discarded.
Factory Defaults
When the Factory Defaults option is selected, the datalogger
settings will all be set back to their factory default values.
TOC 27