Campbell Scientific LoggerLink Mobile App for Android User Manual
Page 10
Name
The Name used to identify this datalogger in LoggerLink.
Data files collected from this datalogger will be stored in a
sub-directory with this name.
PakBus Settings
Address
The PakBus Address of the datalogger you will be
connecting to. The valid range is 1 through 4094.
However, PakBus addresses greater than 3999 are typically
reserved for PakBus routing devices and ports.
Neighbor
The PakBus address of the neighbor you will go through to
connect to your datalogger. A value of 0 means you will
connect directly to your datalogger.
Security Code
The Security Code is only required if security has been
enabled on your datalogger. In order for LoggerLink to
connect to a security-enabled datalogger, the security code
of at least level 3 is required. The level 3 security code
allows you to check the clock and collect data. The level 2
security code is required to set the clock or change public
variables. The level 1 security code unlocks the highest
level of security and allows you to change or retrieve the
program as well as change status table variables.
8