beautypg.com

Campbell Scientific ET107 Evapotranspiration Monitoring Station User Manual

Page 95

background image

Appendix B. PS24 24 Ahr Power Supply and 10 x 12 inch Enclosure

3. Place the bottom strut clamp and bracket approximately 12 inches below

the top clamp. This clamp is installed with the hook side down. The

bracket might have to be moved a little to accept the enclosure bracketing,

so don’t tighten the bracket yet. FIGURE B-5 shows the top and bottom

brackets correctly positioned on the ET107 pole.

FIGURE B-5. Both strut clamps and brackets on ET107 pole

B-5