12 sensor verification and clock set, Sensor verification and clock set, 25. connecting sensor cabling to enclosure – Campbell Scientific ET107 Evapotranspiration Monitoring Station User Manual

Page 43

ET107 Weather Station

FIGURE 2-25. Connecting sensor cabling to enclosure

2.4.12 Sensor Verification and Clock Set

1. Send the weather station program to the station using your Campbell

Scientific software such as VisualWeather, PC400, or LoggerNet. Verify

all sensors are functioning correctly. Verify the weather station clock and

set as necessary.

The ET107 comes with a default program (see Appendix D,

Default Programs).

Use standard time in the station if calculating evapotranspiration

(ETsz). Do not use daylight savings time.

NOTE