beautypg.com

16. gill windsonic mounting shaft, 17. gill windsonic connected to cable – Campbell Scientific ET107 Evapotranspiration Monitoring Station User Manual

Page 35

background image

ET107 Weather Station

FIGURE 2-16. Gill WindSonic mounting shaft

3. Slide the connector and cable up through the center of the mounting shaft.

Plug the cable into the Gill WindSonic sensor. The connector has a key

and needs to be pushed in then rotated clockwise to lock it in place. See

FIGURE 2-17.

FIGURE 2-17. Gill WindSonic connected to cable

25