Siemens MQ95520N - Manual (Page 6)

6
This appliance is designed for processing
normal household quantities in the home or
similar quantities in non-industrial applications.
Non-industrial applications include e.g. use in
employee kitchens in shops, offices, agri-
cultural and other commercial businesses, as
well as use by guests in boarding houses, small
hotels and similar dwellings.
Use the appliance for processing normal
quantities of food for domestic use.
These operating instructions refer to various
models.
If an accessory is not supplied as standard, it can
be purchased subsequently from customer
service.
Please keep the Instructions for Use in a safe
place. If passing on the appliance to a third
party, always include the operating instructions.
Overview
Please fold out the illustrated pages.
Base unit
1 Ejector button
For removing the tools
2 5-step switch + fast and continuous
operation
For switching the appliance on and off and
adjusting the operating speed.
0/Off = switched off
1 = slowest speed
5 = fastest speed
M = fast and continuous operation (fastest
speed) press to the left and hold in place
3 Apertures for inserting the tools
4 Rear aperture with catch for inserting
accessories, e. g. high-speed hand
blender
5 Release buttons
For removing accessories from the rear
aperture. Press both buttons simultaneously.
6 Tools
a Stirrer
b Kneading
hook
лзгЙ=гзЗЙдл
c High-speed hand blender
d Blender jug
e Universal cutter (separate operating
instructions)
If the universal cutter and high-speed hand
blender are not supplied as standard, they can
be ordered from customer service.
Safety Information
oáëâ=зС=беамку
bäÉÅíêáÅ=лЬзЕв=кблв
Connect and operate the appliance only in
accordance with the specifications on the rating
plate.
Do not use if the cord or appliance is damaged.
Keep children away from the appliance.
Supervise children to prevent them from playing
with the appliance.
Do not allow persons (also children) with
restricted physical sensory perception or mental
abilities or with lack of experience and
knowledge to operate the appliance unless they
are supervised or have been instructed in the
use of the appliance by somebody who is
responsible for their safety.
Always pull out the mains plug after using the
appliance, before cleaning the appliance, before
leaving the room or if a fault occurs. Do not
place the power cord over sharp edges or hot
surfaces.
To prevent injury, a damaged power cord must
be replaced by the manufacturer or his
customer service or a similarly qualified person.
Only our customer service may repair the
appliance.
Do not use the appliance with damp hands and
do not operate at no load.
Operate the appliance with original accessories
only.
Insert tools of one type only (e.g.kneading hook).
Never simultaneously use tools and an
accessory inserted in the rear aperture.
Caution when processing hot liquids.
Liquids may splash during processing.
Do not immerse the appliance in liquid.
If there is a power failure, the appliance remains
switched on.
oáëâ=зС=беамку>
Before changing tools and high-speed hand
blender, wait until the appliance has come to
a standstill – when switched off, the appliance
continues running briefly. Never grip the blade of
the high-speed hand blender. Never grip the
rotating tools. Never clean the high-speed hand
blender with bare hands. Use a brush.
en
`зеЦк~нмд~нбзел=зе=нЬЙ=ймкЕЬ~лЙ=зС=узмк=
еЙп=pfbjbkp=~ййдб~åÅÉK
fе=ЗзбеЦ=лзI=узм=Ь~оЙ=зйнЙЗ=Сзк=~=ãçÇÉêåI=
ÜáÖÜJèì~дбну=ЗзгЙлнбЕ=~ййдб~åÅÉK=
vзм Е~е СбеЗ=СмкнЬЙк=беСзкг~нбзе=~Дзмн=змк=
йкзЗмЕнл=зе=змк=пЙД=й~ЦЙK