Clary SP Series-Model PD - Manual (Page 19)

T H E C O N T I N U O U S P O W E R C O M P A N Y
19
Table 9: CLARY OutPost
TM
BATTERIES*
Estimated Runtime
(Per set @ 77°F / 25°C)
(New Batteries, fully
charged)
Unit
Weight
Overall Dimensions
Per Battery Inches (cm.)
Clary
Part. No.*
Volts/
A-hrs.
300
Watts
500
Watts
700
Watts
875
Watts
Lbs.
(Kg.)
Length
L
Width
W
Height
H
OP72C
(Set of
Six
Batteries)
12
VDC/
41 AH
6.5
Hrs.**
4.0
Hrs.**
2.5
Hrs.**
1.8
Hrs.**
29
(13.2)
7.68
(19.6)
5.15
(13.1)
7.9
(20.1)
*OP72X battery sets include six (6) batteries per set. Wired in series, each set provides 72 VDC.
** Actual times may vary, runtimes are dependent on many factors.
Lower/Higher AH capacity batteries, allowing less or more runtime, are available on special order.
Contact factory for more information.
Communications, Controls & Diagnostics
Alarm Function Monitoring: The traffic UPS comes standard with a DB-9F connector with open
collectors (40 V @ 20 mA) indicating On-Battery, Low-Battery, Timeout on-battery and Alarm.
A separate RS232 Interface is provided via a DB-9F connector allowing full, interactive, remote
computer monitoring and control of the UPS functions via standard UPS protocols.
Optional TCPIP/Ethernet available, contact factory for more information.
Front Panel controls: Power ON, Cold (DC) Start, Alarm Silence, Battery Test, Bypass Circuit
Breaker, and DC/Battery Circuit Breaker.
Options
Battery Tray to hold three (3) OP72C batteries is 19” wide for use in 170 type cabinets and
mounts on standard RETMA rails.
Swing-out Battery Box, mounts on right rail inside back door of 170 type cabinets. Box is designed
to hold tree (3) OP72C batteries
Fast Battery Module, optional module provides extra charging current to the batteries when
required, reducing charging time.