Clary SP Series-Model PD - Manual (Page 17)

T H E C O N T I N U O U S P O W E R C O M P A N Y
17
2.2 Specifications
The various specifications of the UPS system are provided in the following tables.
Table 4: ELECTRICAL SPECIFICATIONS
Electrical Specifications
Input Specification
Nominal Input Voltage 120 VAC, Single Phase
Input Voltage Range 85 VAC to 135 VAC
Input Frequency 45 to 65 Hz (+/- 5%)
Input Configuration 3 Wire (Hot, Neutral & Ground)
Input Current (Max. draw) 8.8 amps, Power-Factor Corrected
Input Protection Input breaker 15 amps (20 amps PD1250 (PLUS) &
SP2000)
Output Specification
Nominal Output Voltage 120 VAC, Single Phase
Power Rating 1.25 KVA (1250VA/875W), 2KVA (2000VA/1400W)
Output Voltage Regulation +/- 2% for 100% step load change and from
High battery to Low battery condition
Output Frequency 50 or 60 Hz (+/- .5%) unit not in sync.
Output Configuration 3 Wire (Hot, Neutral & Ground)
Output Wave Form True Sine wave
Overload capability 110% for 10 minutes 200% for 50 milliseconds
2k PLUS 160% for 10 seconds
Fault clearing Current limit and automatic shutdown
Short circuit protection Current limit and automatic shutdown
Efficiency 90% at full load (on utility)
Load Power Factor .7 lagging through unity to .7 leading