MagTek Excella STX99875340 - Manual (Page 85)

Section 6. Keys Received From Device
75
SECTION = DocInfo
The DocInfo section includes keys that report on various attributes of the check document and
information on the MICR data read from the check.
DocUnits
This key specifies the units of measurement used to report on check document dimensions (see the
DocWidth and DocHeight keys below). This key is supported by Excella and Excella STX.
Values Value Description
ENGLISH Dimensions in thousands of an inch
METRIC Dimensions in millimeters
DocWidth
This key specifies the width of the check document based on the scanned image. This key is supported by
Excella and Excella STX.
Values Value Description
numeric value Width dimension of scanned document
DocHeight
This key specifies the height of the check document based on the scanned image. This key is supported by
Excella and Excella STX.
Values Value Description
numeric value Height dimension of scanned document
MICRFont
This key specifies the MICR font detected and read from the check. This key is supported by Excella and
Excella STX.
Values Value Description
E13B E13B font was detected on the check read
CMC7 CMC7 font was detected on the check read