MagTek Excella STX99875340 - Manual (Page 29)

Section 3. Excella API
19
Example
char logString[256];
DWORD dwStatus;
dwStatus = MTMICRDeviceConnect(“192.168.10.100”,
INTERNET_DEFAULT_HTTP_PORT,
INTERNET_OPEN_TYPE_DIRECT,
“ProxyServer”,
“ProxyByPassIP”);
if(dwStatus!=MICR_ST_OK)
{
sprintf (logString, "Opening Device FAILED - ERROR %d", dwStatus);
MessageBox (logString, "Demo", MB_OK);
}
MTMICRDeviceDisconnect
MTMICRDeviceDisconnect function disconnects the device that has the given IP address or DNS name.
ULONG MTMICRDeviceDisconnect (LPSTR lpszDevice);
Parameters
lpszDevice Pointer to a null terminated string that contains the IP address or DNS name of the device. This is the device
that is previously connected using function MTMICRDeviceConnect.
Return Values
MICR_ST_OK
MICR_ST_BAD_DEVICE_IP_OR_DOMAIN_NAME
MICR_ST_DEVICE_NOT_FOUND
MICR_ST_BAD_DEVICE_IP_OR_DOMAIN_NAME
Remarks
If the parameter lpszDevice is NULL, the return value is MICR_ST_BAD_DEVICE_IP_OR_DOMAIN_NAME.
Example
char logString[256];
DWORD dwStatus;
dwStatus = MTMICRDeviceDisconnect(“192.168.10.100”);
if(dwStatus!=MICR_ST_OK)
{
sprintf( logString, "CANNOT CLOSE DEVICE - ERROR %d", dwStatus);
MessageBox (logString, "Demo", MB_OK);
}