MagTek Excella STX99875340 - Manual (Page 63)

Section 5. Keys Sent to Device
53
SECTION = Application
The Application section includes keys to configure some required characteristics of the unit.
Transfer
This key determines the file transfer method. This key is supported by Excella and Excella STX.
Values Value Description
HTTP Default: Transfer files using HTTP protocol
FTP Transfer files to FTP server
DocUnits
This key determines the unit of measurement. This key is supported by Excella and Excella STX.
Values Value Description
ENGLISH Default: Dimensions in thousandths of an inch
METRIC Dimensions in millimeters
SECTION = ProcessOptions
The ProcessOptions section includes keys that control various operational options during the transaction.
ReadMICR
This key selects the MICR font to be read on the check. This key is supported by Excella and Excella
STX.
Values Value Description
E13B Decode only E13B character set
CMC7 Decode only CMC7 character set
ALL Auto-detect and decode both E13B and CMC7
NO Suppress MICR reading
Endorse
This key determines what type of printing is required on the check. This key is supported by Excella and
Excella STX.
Values Value Description
NO No printing required
BACK Request printing on the back (endorsing)
FRONT Request printing on the front (franking). This value is valid for Excella STX
only.
BOTH Request printing on the back and the front (endorsing and franking). This value
is valid for Excella STX only.