Videotec ULISSE NETCAM - Manual (Page 42)

EN - English - I
nstruc
tions manual
40
12 Maintaining and
cleaning
before doing any technical work on the
device, disconnect the power supply.
12.1 Maintaining
Maintenance must be carried out by
personnel trained to operate on electrical
circuits.
12.1.1 Fuses replacement
Maintenance must be performed with the
power supply disconnected and the circuit-
breaker open.
F1
F2
Fig. 83
FUSES REPLACEMENT
Voltage Fuse F1 Fuse F2
24Vac, 50/60Hz F 6.3A L 250V 5x20 T 8A H 250V 5x20
120Vac, 50/60Hz F 6.3A L 250V 5x20 T 4A H 250V 5x20
230Vac, 50/60Hz F 6.3A L 250V 5x20 T 2A H 250V 5x20
Tab. 9