beautypg.com

Holtkoetter 2969ES User Manual

Holtkötter international, inc, Assembly instructions for, Energy saver wall sconce

background image

Major fixture parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH.
Final assembly by Holtkötter International, Inc. in South St. Paul, MN.

Holtkötter

®

and Holtkötter Leuchten

®

are registered trademarks

of Holtkötter International, Inc. All Rights Reserved.

© Holtkötter International, Inc.

HOLTKÖTTER INTERNATIONAL, INC.

155 Hardman Avenue South, South St. Paul, MN 55075

fax: (888) 552-8661 • phone: (800) 899-5444

ASSEMBLY INSTRUCTIONS FOR

www.holtkoetter.com

e-mail: [email protected]

Energy Saver Wall Sconce

No. 2969/1*ES

Please make sure that the following parts for your fixture are enclosed.

A. Fixture including 1 x 13 W/120 V compact

fluorescent bulb, Order Code: 9250*013-GU24

B. Glass

This fixture comes completely assembled. After installation, you will need
to install the glass.

IT IS FIRMLY RECOMMENDED THAT A LICENSED ELECTRICIAN INSTALL THIS FIXTURE.

This producT musT be insTalled in accordance wiTh The applicable

insTallaTion code by a person familiar wiTh The consTrucTion and

operaTion of The producT and The hazards involved.

Installation Instructions

1. Remove the universal crossbar strap from the back of the sconce.
2. Connect the wires from the sconce with the wires in the outlet

box according to generally accepted electrical standards.

3. Mount the crossbar strap to the outlet box after making the wire

connections.

4. Mount the fixture to the crossbar strap.
5. Install the glass in the finished ring brackets.
6. Your wall sconce is now operational.

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth
can be used to spot clean. Do not use common household cleaners
on lamps or fixtures, as the lacquer on the outside of the brass may be
damaged as a result. Enjoy your new Holtkötter lamp.