Holtkoetter 6265 User Manual

Bedside reading wall sconce no. 6265, Assembly instructions for, Caution, important safety instructions

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

and Holtkötter Leuchten

© Holtkötter

Bedside Reading Wall Sconce

No. 6265

Congratulations, you have just purchased one of the finest
reading lamps available on the market today. This lamp has
a telescoping shade that allows the user to focus the halogen
light where they want it and a full-range dimmer to control
the light output. The reflector houses a secondary aluminum
reflector covered with a frosted glass shield that evens and
focuses the light output of the encased 20 Watt Halogen bulb.

Replacement Bulb Order Code: 9250*020-HSTAR-G4

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp,
soft cloth can be used to spot clean.

Do not use common household cleaners on lamps or fixtures,
as the lacquer on the outside of the brass may be damaged
as a result.

Enjoy your new Holtkötter lamp.

General Installation Instructions
IT IS FIRMLY RECOMMENDED THAT A LICENSED ELECTRICIAN INSTALL THIS
FIXTURE.

1. Remove the universal crossbar strap from the back of the sconce.

2. Mount the universal crossbar strap to the outlet box before making the wire connections.

3. Connect the wires from the sconce with the wires in the outlet box according to

generally accepted electrical standards.

4. Mount the backplate of the sconce to the crossbar strap and secure with finished

screws.

6265/1

CAUTION, IMPORTANT SAFETY INSTRUCTIONS

This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electrical shock. This plug will fit a polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC

SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR

INJURY TO PERSONS

WARNING - To reduce the risk of FIRE, ELECTRIC

SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR

INJURY TO PERSONS:

1. Turn off power/unplug and allow to cool before replacing bulb.
2. Bulb gets HOT quickly. Contact only switch/plug when turning on.
3. Do not touch hot lens, guard or enclosure.
4. Do not remain in light if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that burn.
7. Use only with a 20 Watt, low-voltage Halostar G4 or smaller bulb.
8. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
9. Do not operate the portable luminaire with a missing or damaged guard, lamp containment

barrier or UV filter.

SAVE THESE INSTRUCTIONS