Holtkoetter VL300ES - Manual

205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: [email protected]
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN. Holtkötter ® and Holtkötter Leuchten ® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Volkslampe Floor Lamp
No. VL300
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.
Congratulations, you have purchased one of the finest energy-efficient reading lamps available
on the market today. The Volkslampe VL300 Floor Lamp comes packaged in two boxes,
including:
Fixture Box:
1. Floor lamp base
2. 3x Energy Star
® rated compact fluorescent bulbs
(120V/23W-GU24), manufactured by Westinghouse.
Order Code: 9250*023-GU24
C .
Shade Box:
1. Fabric shade G
2. Frosted glass shield B
3. White mesh diffuser H
Assemble Volkslampe VL300
1. Unscrew the three white nuts A located near the
socket assembly.
2. Place the frosted glass shield B , smooth side down,
over the socket assembly. To secure the glass shield,
screw the three white nuts
A back in place. Do not
overtighten.
3. Install the three compact fluorescent bulbs C . Push
and turn the bulbs into the sockets.
4. Unscrew the finished knob D located at the top of the
center stem E . Remove one of the plastic washers
F .
5. Place the fabric shade G onto the center stem,
followed by the white mesh diffuser H and the plastic
washer F removed in Step 4.
6. Tighten the finished knob D on the center stem to
secure the fabric shade G and white mesh diffuser H .
Your lamp is now operational.
Diagram
E
A
H
G
B
C
D
F