Holtkoetter VL200ES - Manual

205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: [email protected]
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN. Holtkötter ® and Holtkötter Leuchten ® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Volkslampe Table Lamp
No. VL200
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.
Congratulations, you have purchased one of the finest energy-efficient reading lamps available
on the market today. The Volkslampe VL200 Table Lamp comes packaged in two boxes,
including:
Fixture Box:
1. Table lamp base
2. 3x Energy Star
® rated compact fluorescent bulbs
(120V/18W-GU24), manufactured by Westinghouse
Order Code: 9250*018-GU24
E
Shade Box:
1. Fabric shade D
2. Frosted glass shield J
3. White mesh diffuser B
Assemble Volkslampe VL200
1. Unscrew the two white nuts G located near the socket
assembly and remove the plastic washers F .
2. Place the frosted glass shield J , smooth side down,
over the socket assembly. To secure the glass shield,
place a washer
F over each stem and screw the two
white nuts G back in place. Do not overtighten.
3. Install the three compact fluorescent bulbs E . Push
and turn the bulbs into the sockets.
4. Unscrew the finished knob A located at the top of the
center stem H . Remove one of the plastic washers
C .
5. Place the fabric shade D onto the center stem,
followed by the plastic washer C and the white mesh
diffuser B .
6. Tighten the finished knob A on the center stem to
secure the fabric shade D and white mesh diffuser B .
Your lamp is now operational.
B
D
J
A
C
F
E
G H