beautypg.com

Holtkoetter VL100ES User Manual

Volkslampe table lamp no. vl100, Assembly instructions for

background image

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

e-mail: [email protected]

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

®

and Holtkötter Leuchten

®

are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter

Volkslampe Table Lamp

No. VL100

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be
used to spot clean. Do not use common household cleaners on lamps or fixtures, as
the lacquer on the outside of the brass may be damaged as a result. Enjoy your new
Holtkötter lamp.

Congratulations, you have purchased one of the finest energy-efficient reading lamps
available on the market today. The Volkslampe VL100 Table Lamp comes packaged
in two boxes, including:
Fixture Box:
1. Table lamp base
2. 2x Energy Star

®

rated compact fluorescent bulbs (120V/18W-GU24),

manufactured by Westinghouse. Order Code: 9250*018-GU24

Shade Box:
3. Fabric shade

D

4. Frosted glass shield

J

5. White mesh diffuser

B

Assemble Volkslampe VL100

1. Unscrew the two white nuts

G

located near the

socket assembly and remove the plastic washers

F

.

2. Place the frosted glass shield

J

, smooth side

down, over the socket assembly. To secure the
glass shield, place a washer

F

over each stem

and screw the two white nuts

G

back in place.

Do not overtighten.

3. Install the two compact fluorescent bulbs

E

.

Push and turn the bulbs into the sockets.

4. Unscrew the finished knob

A

located at the

top of the center stem

H

. Remove one of the

plastic washers

C

.

5. Place the fabric shade

D

onto the center stem,

followed by the plastic washer

C

and the white

mesh diffuser

B

.

6. Tighten the finished knob

A

on the center stem

to secure the fabric shade

D

and white mesh

diffuser

B

. Your lamp is now operational.

H

G

B

D

J

E

A

C

F