beautypg.com

Holtkoetter 9602LED User Manual

Color blend led floor lamp no. 9602*led, Assembly instructions for

background image

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

e-mail: [email protected]

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

®

and Holtkötter Leuchten

®

are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter

Color Blend LED Floor Lamp

No. 9602*LED

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.

Congratulations, you have just purchased
the leading-edge dimming technology from
Holtkötter International, Inc. Our “Dimm-System
Punkt 1” (Dimming System Point 1 (*P1)) is
specifically designed to provide specialized
features for ease and convenience of use.

Features of “Dimm System Punkt 1” include:

Point Dimming - the lamp may be turned
on or off with a single click of the P1
dimmer. Each switch operates one type
of LED.

Dimming Cycle - to adjust the lamp to the
perfect light level for any situation, press
and hold the P1 dimmer. The dimmer will
cycle from the last dimmer setting. Press
and hold it again to adjust as needed.
When the lamp achieves the light level of
your choice, release the P1 dimmer.

This low-voltage LED floor lamp comes fully assembled.

Technical Specifications

Light Engine:

Holtkötter PC Board LED 13-2 with Two-Tone LED
Technology

Optic / Reflector:

Holtkötter Aluminum Reflector with precise
Color Blend Optics

Light Output:

525 / 595 Lumens (∑ 1120)

Light Color:

3000 / 6000 Kelvin

Control/LED Driver/Dimmer: Holtkötter Dimm-System LED with Dual Color Control

full-range dimming of < 1% - 100%

Maximum Current/Voltage:

1000mA & 14V

System Power Consumption: 2 . . . 14 Watts

Equipped with two dimmers
located on the reflector.

Detail of LED Reflector