Holtkoetter 8193LED User Manual

Assembly instructions for

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

and Holtkötter Leuchten

© Holtkötter

Bernie Series LED Wall Sconces

No. 8193*LED & No. 8195*LED

These low-voltage LED wall sconces come fully assembled and ready for installation.

IT IS FIRMLY RECOMMENDED THAT A LICENSED ELECTRICIAN

INSTALL THIS FIXTURE.

General Installation Instructions

1. Disconnect power before servicing.
2. Remove the universal crossbar strap from the back of

the sconce.

3. Mount the universal crossbar strap to the outlet box

before making the wire connections.

4. Connect the wires from the sconce with the wires in the

outlet box according to generally accepted electrical
standards.

5. Mount the backplate of the sconce to the crossbarstrap

and secure with finished screws.

Technical Specifications

Light Engine:

Holtkötter PC Board LED 11-8 with 8x CREE XP-G LEDs

Optic / Reflector:

Holtkötter Aluminum Reflector ø 134x100 with 60˚ x 5mm Optics

Light Output:

1120 Lumens equivalent to 80 W Halogen

Light Color:

2900 Kelvin

Control/LED Driver/Dimmer: Holtkötter LED Dimmer with full-range dimming of < 1% - 100%

Maximum Current/Voltage: 1000mA & 18V

System Power Consumption: 2 . . .12 Watt

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result.

max. extension: 28¼˝

⁄

max. extension: 49˝

⁄

8193/8*LED

8195/8*LED

Detail of LED Reflector

This manual is related to the following products:

8195LED