Anritsu 373XXA - Manual (Page 179)

hering to connector interfaces. When not in use, keep the connectors
covered.
Visual Inspection Precision connectors should be inspected periodically. Check for the
following:
q Bent or broken center pin
q Damaged threads
q Other bent or damaged connector parts
q Dirt or foreign material in connector cavity.
C-3
REPAIR/
MAINTENANCE ANRITSU recommends that no maintenance other than cleaning be
attempted by the customer. Any device with a suspected defective con-
nector should be returned to ANRITSU for repair and/or service when
needed.
373XXA MM C-5/C-6
APPENDIX C REPAIR/ MAINTENANCE