Kenwood KDC-X898 - Manual (Page 88)

88 |
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
SiriusXM® Satellite Radio (optional tuner and service required)
19-10. Clearing the Parental Lock
setting
You can clear the Parent Lock setting for each
channel.
1
Press [SRC] and select a SiriusXM (“SiriusXM”)
source using [Control] knob.
Refer to
(page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Settings” > “Parental Lock” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
4
Enter the pass code
Operation type Operation
Selection of numbers. Turn [Control] knob.
Determination of the selected numbers. Press [Control] knob.
Selection of column
Press [ E] or [F].
Deletion of all numbers Press and hold [ E].
5
Select “Lock CH All Clear” using [Control]
knob.
6
Select “Yes” using [Control] knob.
“Completed” appears.
Exiting from the Function setting mode
Press and hold [ 1/6].
Pass code setting
• The pass code is set to “0000” as default.
When the “Lock CH Edit” item is not displayed
• The mature content setting may be turned ON. Refer to
<19-11. Setting Parental Lock for Mature content> (page
89)
.
19-9. Parental Lock setting
You can turn on/off Parental Lock for each channel.
1
Press [SRC] and select a SiriusXM (“SiriusXM”)
source using [Control] knob.
Refer to
(page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Settings” > “Parental Lock” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
4
Enter the pass code.
Operation type Operation
Selection of numbers. Turn [Control] knob.
Determination of the selected numbers. Press [Control] knob.
Selection of column
Press [ E] or [F].
Deletion of all numbers Press and hold [ E].
5
Select “Lock CH Edit” using [Control] knob.
A category list is displayed.
6
Select the category of the channel subject
using [Control] knob.
The list of the channels in the selected category is
displayed.
7
Select a channel using [Control] knob.
Parental Lock for the selected channel is turned on
and off alternately each time you press [Control]
knob.
“
” is indicated for the selected channel.
Exiting from the Function setting mode
Press and hold [ 1/6].
Pass code setting
• The pass code is set to “0000” as default.
For how to change the pass code, refer to <19-12. Parental
Lock pass code setting> (page 89) .
When the “Lock CH Edit” item is not displayed
• The mature content setting may be turned ON. Refer to
<19-11. Setting Parental Lock for Mature content> (page
89)
.
Listening to the channel for which Parental Lock is turned
on
• If a channel for which Parental Lock is turned on is selected,
a pass code input screen appears. Programs on the selected
channel can be received only when the input pass code is
correct.