Kenwood KDC-X898 - Manual (Page 85)

English | 85
19. SiriusXM® Satellite Radio (optional tuner and service required)
19-4. Channel preset memory
You can store a channel in the memory.
1
Press [ E] or [F] to select the channel.
2
Press [ 1/6] twice.
Enter the Preset memory mode.
3
Turn [Control] knob to select a memory
number (“1” – “24”).
4
Press and hold [Control] knob.
Exiting from the Preset memory mode
Press and hold [ 1/6].
About the Mix Station preset mode
• If you press [ 1/6] three times in step 2, the Mix Station
preset mode is selected with “Mixed Preset List” displayed.
In this mode, different bands and tuner sources (FM, AM,
SiriusXM, HD Radio tuner etc.) can be saved in the same
preset layer, which allows you to recall the desired station
without switching between bands or tuner sources.
A maximum of six stations can be preset in the Mix Station
preset mode.
19-3. Category and channel search
You can select the channel and category you want
to receive.
1
Press [ 1/6].
“Category Search” appears and enter the Category
and Channel search mode.
2
Select a category using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
3
Select a channel using [Control] knob.
Exiting the Category and Channel search mode
Press and hold [ 1/6].
Until channel selection is enabled
• You cannot search for a channel until the category
information is acquired.