2. audio preset, 3. audio preset recall, 3. audio – Kenwood KDC-X898 User Manual
Page 17
English
|
17
4. Audio adjustments (KDC-X898, KDC-BT858U)
4-3. Audio preset recall
You can recall the Audio control items registered to
the
.
1
Press [SRC] and select a recall source using
[Control] knob.
Refer to
.
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Audio Control” > “Detailed Settings”
>
“Audio Preset” > “Recall” using [Control] knob.
For how to use [Control] knob, refer to
4
Select “YES” using [Control] knob.
“Recall Completed” appears.
Exiting from the Function setting mode
Press and hold [
1/6].
4-2. Audio preset
You can register the values set the Audio control
items.
1
Set the audio control items
Refer to
<4-1. Audio control> (page 16)
.
2
Select “Audio Control”
>
“Detailed Settings”
>
“Audio Preset”
>
“Memory” using [Control]
knob.
For how to use [Control] knob, refer to
.
3
Select “YES” using [Control] knob.
“Memory Completed” appears.
Exiting from the Function setting mode
Press and hold [
1/6].
Number of Audio preset memories that can be stored
• Register a pair of Audio preset memories. You cannot
register them by source.
When reset
• When you press the Reset button, audio control values of all
sources will be set to the values registered here.
Audio control items that can be registered
• The following Audio control items can be registered.
“Bass Center FRQ”
*
, “Bass Level”, “Bass Q Factor”
*
, “Bass EXT”
*
,
“Middle Center FRQ”
*
, “Middle Level”, “Middle Q Factor”
*
,
“Treble Center FRQ”
*
, “Treble Level”, “SubWoofer Level”, “HPF”,
“LPF SubWoofer”, “SubWoofer Phase”
*
KDC-X898 only