Kenwood KDC-X898 - Manual (Page 80)

80 |
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
18. Bluetooth settings
18-1. Registering the PIN code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Press [ Ú].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Settings” > “Detailed Settings” > “PIN
Code Edit” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
3
Input the PIN code
Operation type Operation
Selection of numbers Turn [Control] knob.
Movement to the next digit Press [ F].
Deletion of the last digit Press [ E].
Transmission of PIN code Press [Control] knob.
If “Completed” appears and registration is complete.
Exiting from the Bluetooth mode
Press [ Ú].
Notes on PIN code input
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.
18-2. Downloading the phone book
If the phone book is not downloaded automatically
to this unit to which a cell phone − which is not
compatible with PBAP − is connected, download it
in the following manner:
1
Press [ Ú].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Settings” > “Transfer Phonebook”
using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
When downloading starts, “Downloading ###”
appears.
When downloading is completed, “Completed”
appears.
Exiting from the Bluetooth mode
Press [ Ú].
Maximum number of phone numbers that can be
registered
• Of all registered mobile phones, a total of 400 phones
number can be registered.
• Up to 32 digits can be registered for each phone number
along with up to 32* characters representing a name.
(*32: Number of alphabetical characters. Fewer characters
can be input depending on the type of characters.)
Cancellation of downloading
• To cancel downloading of the phone book data, operate
the cell phone.