Kenwood KDC-X898 - Manual (Page 44)

44 |
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
10. Listen to the CD/ Audio file
10-1. Playing music
Playing a disc
Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is switched
automatically and playback starts.
Close the Disc slot cover.
Playing a USB device
Connect a USB device to the USB terminal.
[1] Front USB terminal
[2] Rear USB terminal
[3] optional accessory
You can connect the iPod or USB device to either
one of the USB terminals provided at the front and
rear of this unit.
When it is connected, the source is switched
automatically and playback starts.
Selecting an audio file folder
Press [ R] or [S] button.
Selecting a song (track or file)
Press [ E] or [F].
Fast-forwarding or fast-backwarding a song
(track or file)
Press and hold [ E] or [F].
Pause and play a song (track or file)
Press and hold [ 1/6].
Removing disc
Open the Disc slot cover upward.
Press [
G].
Removing USB device
Press [SRC] to switch the source to a device
other than USB, and then remove the USB
device.
Data contained in the USB device may be
damaged if you remove it when it is used as the
active source.