6. listening position setting – Kenwood KDC-X898 User Manual
Page 21
English
|
21
DSP settings (KDC-X998, KDC-BT958HD)
“Tweeter”
[2]
“FC”
Shelving filter
1, 1.6, 2.5,
4
, 5, 6.3, 8, 10, 12.5 kHz
“Volume”
Tweete volume
-8 ,-7, -6, -5, -4, -3, -2, -1,
0
dB
(
Colored text
: Factory setting)
[1]
Displayed only when “FC” is set to a value other than
”Through”.
[2]
Function of KDC-X998.
5
Select a setting item using [Control] knob.
6
Select a setting value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1/6].
5-6. Listening position setting
You can adjust sound localization according to the
listening position.
1
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Audio Control”
>
“Pro Setup”
>
“DTA
Settings”
>
“Preset Position” using [Control]
knob.
For how to use [Control] knob, refer to
.
4
Select a listening position using [Control]
knob.
Display
Compensation seat
“ALL”
Not compensating.
“Front R”
Front Right seat
“Front L”
Front Left seat
“Front All”
Front seat
Exiting from the Function setting mode
Press and hold [
1/6].