HighPoint RocketRAID 2310 - Manual (Page 70)

FreeBSD Driver Support
BIOS driver C: is disk2
BIOS 636kB/74512kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(mailto:[email protected], Sat Apr 21 08:46:19 GMT
2001)
Loading /boot/defaults/loader.conf
/kernel text=0x24f1db data=0x3007ec+0x2062c -
<- For FreeBSD 5.1 and later: select “6” on “Welcome to
FreeBSD” screen.
Hit [Enter] to boot immediately, or any other key for
command prompt.
Booting [kernel] in 9 seconds…
<-press SPACE key
Type ’?’ for a list of commands, ’help’ for more de
tailed help.
ok load RR2310
/modules/rr2310.ko text=0xf571 data=0x2c8+0x254
ok autoboot
Note: If you have configured a RAID 10 using 4 disks, it will be registered to system
as device /dev/da0. You can use “/stand/sysinstall” to create partitions and disklabels
(like da0s1e) on da0.Then, create a new filesystem using “newfs /dev/da0s1e”. Now
you can mount /dev/da0s1e to somewhere to access it.
6-7